Saddles

The Gravelier represents the pinnacle of pedaling comfort and performance for gravel riders who put in big miles at an expeditious pace. Gravel riders tend to pedal in a forward-leaning position for long periods of time; the Gravelier accommodates this with a side profile that curves from tip-to-tail and cradles the pelvis to provide “locked-in” support. The perineal relief cutout improves blood ?ow and reduces numbness in sensitive areas when the hips are rotated forward in an aggressive, forward-leaning pedaling position. The Gravelier’s short 246mm length is paired with a mid-length section that quickly widens out to provide ample room if riders choose to shift beyond the primary support zone. Built for Speed. Built for Distance. Built for Gravel. - Center cutout reduces perineal pressure, improve blood ?ows and reduce numbness when the hips are rotated forward in an aggressive pedaling position - Stiff, yet responsive, fiber-infused Fusion Form base optimizes power transfer under hard efforts while also absorbing vibrations transferred through the bike - New Fusion Form base allows model-specific amounts of fiber to be infused into the nylon to create a ?ex profile that balances comfort and support - Pressure mapping technology was used to create a foundational shape based on anatomical science, which was then refined to create the perfect shape for gravel cycling - Extra width and padding in the nose to provide additional support when a rider scoots forward for maximum power - Extended rail clamping length provides a wide range of fore/aft saddle positions - Integrated under-saddle mount for tools and storage, compatible with existing brands of saddle accessories - Titanium saddle rails

The Koda was refined through two years of feedback from female testers and has evolved into a saddle that even the boys at the office are fighting over. This saddle boasts all-day comfort and a shape that everyone can enjoy. - All-day comfort with a generously open channel dividing supportive outer zones to alleviate pressure on your sensitive bits - Short nose provides seamless on-off transitions while a slightly swooped shape provides an adequate tail to brace against - Cromoly rails

An excellent all-mountain and distance saddle, the Pure features a drop nose design preventing hang ups, as well as enough padding for all day comfort. The Pure is a sure bet for almost any rider and an even better bet for bikepackers! - Microfiber Cover - Flex-Tuned Shell - DNAx Padding - Steel rails - Weight: 340g

This female-focused saddle has become one of our most popular models with its ergonomic shape, smooth curves and low-profile stitching. Its wide and rounded, fall-away profile make the Speed She an easy-to-ride, easy-to-maneuver women's saddle. - Steel rails - Microfiber Cover - Flex-Tuned Shell - DNAx Padding - Weight: 315g

WTB's best-selling saddle utilizes our shock-absorbing, dual compound Soft-Shell base to provide unparalleled comfort at an excellent value. Supportive padding and mid dimensions make for a near fool-proof favorite at a don't-think-about-it-twice price. - Steel rails

The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Cromoly rails

For over two decades, Terry has worked with all levels of riders and addressed all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. One of the best values you can buy in an Italian-made saddle, the Butterfly Cromoly is also one of the most popular saddles in the Terry line. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails that allow us to save a few euro and make this variation a great deal. - Length x width: 262mm x 155mm - Weight: 326g / 11.5oz - Rails: FeC alloy - Cover/features: smooth Dura-tek with printed accents - Made in Italy

In designing the Corta saddle for women, we endeavored to create an entirely new shape for performance riders whose riding style has evolved. Maybe you're more competitive, riding longer distances, or have a new bike that you can't get comfortable on – this snub-nose style saddle could be your solution. The Corta has a shorter overall length and a dropped nose which combine to eliminate excess surface area, prevent chafing, and alleviate pressure. We've also engineered it with our largest cutaway for the greatest relief channel possible. It's supportive and flat at the rear so you have a good platform for sustained, seated climbs. Aesthetically, the Corta is a streamlined beauty with textural detail and state-of-the-art technology. If you're ready to step up to the latest in technology, Terry comfort engineering, and high-performance design, Corta was made for you. - Seamless bond between Dura-tek cover and micro-suede panels provides a smooth contact surface to reduce chafing - Screen-printed graphics and perforations - Largest cutaway in the Terry saddle line - Length x width: 250mm x 149mm - Weight: 235 grams - Rails: Ti-316

With over 100,000 currently on the road, the Liberator X for women has earned its reputation as one of the most comfortable saddles for nearly any kind of rider. We recommend it to people who are in a slightly more upright riding position on their bike, have a high degree of saddle sensitivity, ride great distances, tour by bike, and are likely to ride daily. The ergonomically-shaped back panel of the Liberator X reduces the points of stitching contact between you and your saddle. A wider, contoured rear, large cutaway with extended depression off the back, and more padding throughout make the Liberators excellent options for touring (also available in gel and elite versions). - Black Dura-tek cover with gray stitching - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Length x width: 249mm x 163mm - Weight: 377 grams; 13.3 ounces - Rails: Satin steel

Our Raven saddle was designed using the latest in vacuum molding technology, allowing for a sleek, seam-free contact surface and clean integration with the saddle's substrate base. The benefit – no chafing, no hot spots. It has a narrow profile with dropped nose shaping in front that helps eliminate pressure and a flat rear that supports your sit bones. We've also achieved the ideal balance of foam padding with an ergonomic relief channel, making it a very comfortable option for those looking to minimize bulk. The Raven is a slightly longer saddle that gives you more fore-aft positioning range on the bike and it comes with a smooth, durable synthetic cover. - Smooth, matte black Dura-tek cover - Pressure relief channel - Drop nose design for comfort - Length x width: 265mm x 150mm - Weight: 275 grams; 9.7 ounces - Rails: Cr-mo

• Kids' Racing/MX style • Padded • 5.5 x 9 inches

Includes pre-installed post style seat post clamp and support bar clamps Specs: - Rail: Trike Western Saddle w/ Hrdwre (16" Wide x 12" Long)

For as long as there've been saddles, women have been having issues with them. But, where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And, when you combine this technology with the long-nosed, flat profile of the Phenom Expert saddle, with its hollow titanium rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level II padding: Medium density foam for bike feel with additional cushioning. - Lightweight, durable, and hollow titanium rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.

MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with the long-nosed, curved profile of the Romin EVO Pro saddle, with its FACT carbon rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Ultra-light, strong, and oversized FACT carbon rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.

Quick Overview Our latest addition to the Tailbones® family introduces a top layer of Memory Foam for a more personalized feel and added comfort. Serfas Tailbones® saddles supports the sit bones and provides a smooth comfortable ride using Progressive Density Foam while a Deep Groove Design allows maximum blood flow into the neurovascular bundle for drastically reduced numbness and discomfort. Features: - Dual Density Base - Memory Foam Inserts Under Sit Area - Progressive Foam Technology - Relaxed Riding Position - Rails: Steel - Cover: Waterproof Vinyl - Length: 261mm - Width: 164mm - Weight: 374g +/- 90 Day Comfort Guarantee We understand finding the perfect saddle can be tough, which is why every Serfas® saddle sold is backed by our 90-Day Comfort and Satisfaction Guarantee Limited Lifetime Warranty We stand behind our products and are committed to providing the high quality all of our customers deserve which is why Serfas® warrants to the original purchaser of a saddle that the product is free from defects in materials and workmanship for the lifetime of the product.

The Variant saddle is a truly unique product that takes seat customization and overall comfort to a new level. The Variant 2 comes with five compression inserts that are user-adjustable allowing the saddles to flex at varying rates. Based on your preference, you can fine tune the Variant; making it the most customizable saddle on the market. Features: - MTB Comfort - Adjustable Flex Base - Pressure Eliminating Channel - Quick Change System - Race Foam Construction - Rails: Stainless Steel - Cover: Waterproof, Anti-Microbial Microfiber Specs: - Length: 272mm - Width: 145mm, 155mm - Weight: 200 Grams

The ergonomic shape of the Shortfit Open-Fit Dynamic saddle features a reduced length with proper support for the ischial bones, and excellent pressure distribution in the front section. The large central cut-out (Open-Fit) ensures maximum comfort and support in various pedaling situations along the entire length of the saddle, improving blood circulation and relieving pressure from the perineal area. - Waved shape that makes the saddle particularly comfortable even for people with a retroverted pelvis, facilitating correct posture when cycling - Focused on Performance, Ergonomics and Comfort

Tour the countryside or tour the country aboard Selle SMP's Avant saddle. It features their patented dropped nose design and large open center channel that eliminate pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for durability and plenty of padding keeps you comfortable in your upright position. Plus, the long steel rails provide ample fore/aft adjustment for the perfect fit.

Selle SMP's Dynamic saddle keeps you moving on those long rides. The patented dropped nose design and large open center channel eliminate pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for added life the and light padding keeps things comfortably light. Plus, the long rails provide ample fore/aft adjustment for the perfect fit.

With its new shape, wide seat, and minimal padding, the Selle SMP F30 saddle allows for better control of the bike with greater freedom of backward/forward movement in the saddle. The F30 is ideal for riders who seek unrivaled comfort and top performances on-road or off-road. - Dimensions: 295 x 149mm - Weight: 295g stainless; 245g carbon

Characterized by a wide seat and slight padding, the F30C saddle is ideal for those who seek great freedom of movement in the saddle, easy seat adjustment, unrivaled comfort, and top performances on-road or off-road. The compact version is both lighter and offers greater freedom of movement. - Dimensions: 249 x 150mm - Weight: 280g Stainless rails; 230g Carbon rails

Racking up serious mileage? Enjoy every mile with a saddle that's comfortable for the long haul. Selle SMP's Lite 209 sports their patented dropped nose design and large open center channel to eliminate pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for durability and plenty of padding keeps you comfortable. Plus, the long rails provide ample fore/aft adjustment for the perfect fit.

Upgrade your daily rider or any bike with Selle SMP's Plus saddle. Boasting their patented dropped nose design and large open center channel, the Plus eliminates pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for added life and the wider platform supports a more upright riding position. Plush padding keeps you comfortable while the long rails provide ample fore/aft adjustment for the perfect fit.

Selle SMP's Pro saddle was the first to introduce their patented dropped nose design and large open center channel that eliminate pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for added life and the stainless steel rails provide vibration damping. Plenty of padding keeps you comfortable while the long rails provide ample fore/aft adjustment for the perfect fit.

Rule on your cruiser bike! This super-sized saddle is specifically developed to offer supreme comfort through town for the laid-back riding style, thanks to the thick Royalgel padding which provides pressure relief and shock absorption, supported by large, dampening elastomers. - Royalgel provides the highest level of comfort. Durable and versatile, this technology absorbs pressure and distributes it across the saddle surface, ensuring the best support for even your longest rides - Built in elastomers will absorb even the most severe shocks without making a sound - Water-resistant saddle thanks to Royal Vacuum, a patented Selle Royal technology that allows the saddle to be 100% sealed and substantially waterproof, even when exposedto heavy, wet weather - Integrated Clip System positioned at the rear of your saddle will make the attachment of a Selle Royal saddle bag or other accessories an easy clip away - Heavy-duty support, tested up to 330lbs

Float Athletic is an anatomic saddle with a central opening designed for greater relief in the pubic area. A slow-moving memory foam padding, Slow Fit Foam, provides superior comfort by adapting to the body and creating a more uniform weight distribution. Slow Fit Foam With its unique slow recovery property, this memory foam provides superior comfort by molding itself to fit the shape of the body's contact points, creating more uniform pressure distribution while maintaining effective support. Integrated Clip System A patented clip system positioned at the rear of the saddle for easy attachment of a Selle Royal saddle bag or other accessory.

Float Moderate is an anatomic saddle with a central opening designed for greater relief in the pubic area. A slow-moving memory foam padding, Slow Fit Foam, provides superior comfort by adapting to the body and creating a more uniform weight distribution. Slow Fit Foam With its unique slow recovery property, this memory foam provides superior comfort by molding itself to fit the shape of the body's contact points, creating more uniform pressure distribution while maintaining effective support. Integrated Clip System A patented clip system positioned at the rear of the saddle for easy attachment of a Selle Royal saddle bag or other accessory. Elastomers Absorbing even the most severe and unexpected shocks, elastomers work both vertically and horizontally for safe, silent and permanently non-deformable performance.

Freeway Fit for Men combines the immediate comfort of a soft-touch cover with the shape memory of Selle Royal's new Slow Fit Foam. Slow Fit Foam is a visco-elastic material that molds to rider's body and guarantees a uniform distribution of the weight. Compared to the traditional foam padding, Slow Fit Foam reduces the hits and the vibrations in the points of contact, improving blood circulation, and the intelligent placement of the padding allows for reduced saddle weight.

Selle Royal Gel Saddle Covers - Ultra-padded gel cover with central anatomical indent for maxium comfort - Royal Gel padding reduces pressure points up to 40%

Add Selle Royal comfort to all of your rides with their Gel Seat Cover. Added on top of your bike's seat, it cushions and eliminates pressure with Selle Royal's RoyalGel and elevated textile patches. This cover fits most exercise bikes at the gym, too, so you can enjoy all your workouts.

Selle Royal Lookin gel saddles are designed for ultimate comfort with an iconic design. A bike saddle for any type of riding. - RoyalGel for supreme comfort does not age, harden, or migrate over time - Xsenium cover allows RoyalGel to move freely and dynamically in all 3 dimensions - ICS compatible - Cool cover allows saddles to stay 25deg cooler than traditional black saddles in the sun - Xsenium Cool Cover

Ride comfortably on even the hottest days with Selle Royal's Lookin saddle. Its Cool Cover top keeps the saddle up to 25 degrees cooler. In addition to the lower temperatures, the Royal Vacuum Light construction keeps the weight to a minimum. And, last but far from least, Selle Royal's Royalgel eliminates pressure points for ride-all-day plushness.

Ride comfortably on even hot days with Selle Royal's Respiro saddle. It boasts a Cool Cover that keeps the saddle up to 25 degrees cooler, and an innovative ventilation channel to keep the air flowing. Complementing these extraordinary features is Selle Royal's Royalgel that eliminates pressure points for awesome plushness. And, this amazing saddle comes in three models so you can choose the perfect fit. If you want the ultimate in breezy comfort, this is it!

- Cool Cover: helps reflect heat, so it stays cooler than traditional black saddles - Center channel cut out aids air flow and keeps blood flowing to all the right places - Water-resistant - Royalgel - Manganese rails & elastomers - Integrated Clip System

Selle Royal, along with researchers from the Sport University of Cologne, the largest sports university in Europe, have applied theory, data and methods to bicycle saddle research in an attempt to unmask the fundamental design characteristics essential to optimizing well-being and overall cycling performance. The result is SCIENTIA, a full spectrum of 9 ergonomic saddles scientifically engineered to precisely and comprehensively fit each rider. With its outstanding design based on a scientific research, this saddle guarantees the ultimate level of comfort that perfectly fits the Athletic rider. Padded with the 3D skingel, specifically positioned in the Central Reservoir for the soft tissues, it avoids shocks due to the innovative Curva Suspension. Sizing - A > 1 (Small) fits riders with less than 11cm of ischial variation - A > 2 (Medium) fits riders with 11-13cm of ischial variation - A > 3 (Large) fits riders with more than 13cm of ischial variation Dimensions/Weight - A > 1 (Small): 289mm long x 127mm wide / 380g - A > 2 (Medium): 289mm long x 144mm wide / 390g - A > 3 (Large): 289mm long x 159mm wide / 418g

Selle Royal, Avenue Moderate, Saddle, Women, Black

- The latest Evolution in the Novus saddle lineup - ''Boost'' short nose improves thigh clearance, saddle fit and reduces weight - Superflow central exhaust increases comfort and improves pressure relief for the perineal area - Titanium Rails - Saddle Weight: 190g

Born to be off-road oriented, the Dimension NDR is a unisex multi-discipline saddle able to ensure more comfort for longer riding thanks to 3mm extra padding all over the surface. The round shape supports the natural pelvic rotation and improves the saddle contact. The snub-nose (35mm shorter than traditional saddles) spreads pressure more evenly, especially in aerodynamic & aggressive positions. Thanks to the wider PAS channel, it reduces the compression of soft tissues eliminating numbness and ensuring the blood flow. Side protectors are also fitted to reduce scratches, rips and tears. - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 143mm - Weight: 221g

The Dimension Space is designed to fit riders that need a semi & round shape, with "medium-low pelvic rotation/flexibility and wider ischial bone distance. The Special Channel we call "PAS" (wider and deeper) eliminates numbness and reduces the compression of soft tissues, improving blood flow in the pelvic area. The extra 7mm of padding with special density foam and 153mm width ensures better comfort for longer rides. Prologo has created this product for women and men with a greater distance between the ischial bones that therefore require a wider saddle. This saddle is focused on extra comfort for the all-round rider and all genders. - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 153mm - Weight: 228g

W400 completes the Proxim range, making it ideal for both e-bikes and standard bikes, for off-road use but also for commuting / leisure use thanks to its size and padding levels (Multi Sector System). Proxim W400 is available in 2 widths: 153mm (for a more sportive use) and 163mm (for a more trekking, leisure and commuting use); thanks to its short length (255mm) the contact points and pressure peaks in the perineal area are reduced. - Rail in chromoly is a perfect compromise between strength and weight

The Prologo Proxim W450 is a versatile saddle, suitable for many uses and disciplines. In the central area, the active foams and the central groove guarantee stability and comfort by dissipating the pressures along the whole surface of the saddle. The closure of the prostate zone also offers better protection of genital areas in extreme climatic conditions. - E-bike specific but an all-terrain and multi-category saddle - Tirox is a light alloy steel with a standard round size of 7mm - Multi Sector System (MSS) features individual zones mapped and separated along the saddle, each composed of different interactive foams and single-cell padding - The cover is designed to increase grip in all weather conditions - The saddle is equipped with a rear handle to facilitate the movement of the bicycle as well as a graphic with reflective materials to improve safety - Semi-round shape along the edges is more flexible allowing greater freedom of movement and facilitating each pedal stroke - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 250mm

The Prologo Proxim W450 is a versatile saddle suitable for many uses and disciplines. In the central area, the active foams and the central groove guarantee stability and comfort by dissipating the pressures along the whole surface of the saddle. The closure of the prostate zone also offers better protection of genital areas in extreme climatic conditions. - E-bike specific but an all-terrain and multi-category saddle - T20 chromoly rail with standard round size of 7mm - Multi Sector System (MSS) features individual zones mapped and separated along the saddle, each composed of different interactive foams and single-cell padding - Semi-round shape along the edges is more flexible allowing greater freedom of movement and facilitating each pedal stroke - Extra padding +6 mm - The saddle is equipped with a rear handle to facilitate the movement of the bicycle as well as a graphic with reflective materials to improve safety - Length: 250mm - Width: 155mm - Weight: 259g

- The Scratch M5 is the latest saddle from Prologo to get the 3D upgrade, bringing further performance to an already iconic seat - 3D printed lattice structure features varying zones, densities, thicknesses and strut sizes that blend together for ultimate comfort and performance - The lower outer edge of the saddle features drains that allow water to seep out and also aids in the cleaning of the seat - Due to the intricacy of the layed hexagonal printing, the saddle is compliant, durable and extremely light weight - PAS models feature a channel in the seat to alleviate pressure and numbness in the pelvic region by promoting healthy perineal blood flow

Developed for the exacting standards of competitive and elite road cyclists, the PRO Stealth Superlight Saddle is PRO’s lightest saddle and is an evolution of the first-generation PRO Stealth Superlight Saddle. This is achieved through a one-piece handmade carbon base with integrated rails. The PRO Stealth Superlight Saddle remains comfortable though, thanks to the popular PRO Stealth design and broad anatomic fit cut-out. Highlights - Superlight - Large anatomic fit cut-out to reduce pressure - Smooth and durable PU cover to minimize friction with cycling shorts - Full carbon base - Rails: carbon - Padding: super lightweight EVA - Weight: from 130g - Width: 142mm and 152 mm - Compatible with PRO Saddle Accessories

Pint-sized cyclists deserve comfortable saddles, too! The Little A.R.S. bike seats are smaller versions of Planet Bike's popular Anatomic Relief Saddle. They come in three sizes to fit 12"-24" wheeled bikes and they're scrappy enough to hold up to youthful exuberance. - Foam padding relieves pressure on soft tissue - Center recess for comfortable anatomic relief - Weather-resistant cover with abrasion-resistant side material - Steel rails - Small: Weight: 271 grams / Seat Size: 203x130mm - Medium: Weight: 292 grams / Seat Size: 225x135mm - Large: Weight: 329 gram / Seat Size: 245x135mm

The MSW Youth Saddle is a comfortable and durable choice for your child's bike. This quality youth bike saddle is built for adventures around the neighborhood and beyond. - Comfortable, memory-foam padding - Polyurethane cover - Steel Rails - Durable rear bumper to protect against drops

The PL 1.0 is the perfect saddle for your high performance bike. A fresh take on our Breakaway saddle, the PL 1.0 fits into the Performance Long category. It features bold new graphics, and all of the comfort you expect from ISM. All of the PL saddles are a full 275mm long, and allow for superb fore-aft rider movement. The rear measures 135mm wide – adding support for those that like to roll their hips back while climbing. Like all ISM saddles, the PL 1.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Long shape allows for fore-aft movement - Wider rear section than our Performance Narrow line Commonly used for: - Road bikes - Mountain bikes Tech specs: - Category: Performance Long - Length: 275mm - Width: 135mm - Padding: 30-Series Foam and Gel - Rails: CrN/Ti Alloy or Proprietary Stainless Steel Alloy - Colors: Black, white

The PR 3.0 is an update of the very popular Typhoon saddle. At 145mm wide, it is our widest PR model – great for upright style bikes, or those seeking maximum support. With 60-series foam and gel padding, you won’t find a softer seat in the ISM line. While the PR 3.0 is loved by many high-level triathletes, it is equally at home on hybrids, road bikes, and city bikes. A true jack-of-all-trades, you won’t find a more comfortable seat in the world. Like all ISM saddles, the PR 3.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Comfortable 60-series foam-and-gel padding - Wider rear section for maximum comfort - Rear transition hook Commonly used for: - Hybrid bikes - Mountain bikes - Commuter / City bikes - Road bikes Tech specs: - Category: Performance Recreation - Length: 235mm - Width: 145mm - Padding: 60-Series Foam and Gel - Rails: Satin Steel - Color: Black

- A new generation saddle shape delivers enhanced comfort, support and better pedaling efficiency in different positions. - Ergonomic cut-out design helps relieve soft tissue pressure and prevent numbness. - High-elastic, free-flowing particles reduce pressure points by more than 20 percent and help distribute pressure across a broader contact area. - Premium ultra-light Giant Rebound foam. - Wider, short-nose design. - Ultra-light full-carbon rails offer superior compliance at minimum weight. - An ultra-light carbon composite base with optimized rail joint structure provides all-day support. - Giant UniClip Mount System compatible. - 248mm x 145mm

The Tempo Aliante R3 is a supportive, stable bike saddle for endurance cycling, designed to deliver all-day comfort thanks to double-density foam, a waved profile, and pressure-relieving cut-out. - ALIANTE: Waved profile saddle designed to maximize comfort, support and pressure relief - R3: Combination of a ride-compliant, carbon-reinforced nylon shell and a Kium hollow rail with high strength-to-weight ratio - WINGFLEX: The shell's side edges flex and adapt to the rider's inner leg movement - DOUBLE DENSITY FOAM: Firmer on the ischial bones, softer on the nose, for optimal comfort in every riding position

TEMPO ARGO R1 is a versatile endurance road saddle with a short-nose design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R1: a combination of a ride-compliant carbon-reinforced nylon shell and a highly stiff carbon rail - Wingflex: the shell's side edges flex and adapt to the rider's inner leg movement - Type 2 foam: progressive cushioning, with lower compression modulus SPECIFICATIONS: TEMPO ARGO R1 150 - Length: 260mm - Width: 150mm - Weight: 195g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 10 x 7mm SPECIFICATIONS: TEMPO ARGO R1 160 - Length: 260mm - Width: 160mm - Weight: 202g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 10 x 7mm

TEMPO ARGO R3 is a versatile endurance road saddle with a short-nose design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R3: a combination of a ride-compliant carbon-reinforced nylon shell and a Kium hollow rail with a high strength-to-weight ratio - Wingflex: the shell's side edges flex and adapt to the rider's inner leg movement - Type 2 foam: progressive cushioning, with lower compression modulus SPECIFICATIONS: TEMPO ARGO R3 150 - Length: 260mm - Width: 150mm - Weight: 229g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm SPECIFICATIONS: TEMPO ARGO R3 160 - Length: 260mm - Width: 160mm - Weight: 235g - Height at 75mm width: 45mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm

A versatile short-nose gravel-specific saddle with a combination of a ride-compliant, carbon-reinforced nylon shell and Kium hollow rails. A ride-compliant, gravel-specific saddle with a short-nose design and generous ischial support for improved stability. GREATER STABILITY Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, the Argo puts riders in a more planted position, making for greater stability and better weight distribution. The Terra Argo's short length allows riders to sit further forward without placing undue pressure on sensitive areas. It also features an ergonomic cut-out that was developed using detailed pressure analysis and input from medical experts. GRAVEL SPECIFIC SADDLE The Argo is our most versatile saddle shape, with each version suited to different riding styles. As the gravel-specific option, the Terra Argo has been engineered with a compliant shell to offer a certain degree of flexibility. This controlled elasticity absorbs road chatter and vibrations, delivering the comfort needed for long distance riding over unpaved roads. STABILITY AND RESPONSIVENESS To better support the Terra Argo's flexible shell, we used our closed-loop Mobius rail system for increased structural stability and responsiveness. The Terra Argo features a waved profile to provide the lower-back support necessary for long rides and to help riders hold their position while climbing on loose terrain. The same goes for the dropped-nose design which allows riders to rotate their pelvis while pushing forward on the nose for better traction and power transfer. LONG DISTANCE COMFORT The padding is made from fizik's proprietary Type-2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. - Argo: versatile short-nose saddle that encourages stability and relieves pressure on sensitive areas - X3: A combination of a ride-compliant, carbon-reinforced nylon shell and a Kium hollow rail with a high strength-to-weight ratio - Mobius Rail: Closed loop design for added strength and weight distribution - Wingflex: The shell's side edges flex and adapt to a rider's inner leg movement - Type 2 foam: Progressive cushioning, with a lower compression modulus - Terra: All-terrain series designed to take you beyond your boundaries - Intended use: Gravel - Concepts: This is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology and bike-fitting in search of ways to improve cycling performance. - Length: 270 mm - Height at 75mm width: 47 mm - Rail: 7x7 mm

The stubby, noseless shape of Transiro Mistica Carbon allows comfort and pure performance in the aero tuck position required for your fastest triathlon cycling leg. The extra-long rail – a super-light, strong carbon on this model - allows for maximum adjustment fore and aft to promote the perfect aero riding position. The Transiro Mistica's new channel design enables better weight distribution across sit bones and the new seamless, friction-free nose construction delivers improved riding comfort, while an extra-grippy material provides maximum riding stability. With a carbon-reinforced nylon shell and featuring a redesigned carriage kit that's more versatile and easy to install. - Shell: Carbon-reinforced Nylon - Rails: Carbon Braided 7 x 9mm - Cover: Thermo welded Microtex - Carriage Kit: cage holder, CO2 charge, inflator, and tube - Integrated Clip System compatible Regular size: - Dimensions: 241 x 135mm - Weight: 205g - Nose: 55mm with Front Transition Hook Large size: - Dimensions: 241 x 141mm - Weight: 215g - Nose: 65mm with Front Transition Hook

VENTO ARGO R1 is a performance racing saddle with a short-nose design that improves stability and allows for a more aggressive, aero riding position. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Vento Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the racing option, Vento Argo has been engineered to deliver a riding feel that suits race bikes with aggressive geometry. The padding is made from fizik's proprietary Type 1 foam formulation, which has a lower profile and is reactive and springy for instantaneous response and optimal power transfer. The purposeful shape of its design helps you achieve a better riding posture: the dropped nose supports the pubic ramus when the pelvis rotates forward to add power or to get more aero. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R1: a combination of a ride-compliant carbon-reinforced nylon shell and a highly stiff carbon rail - Type 1 foam: low-profile, reactive and springy for efficient power transfer SPECIFICATIONS: VENTO ARGO R1 140 - Length: 265mm - Width: 140mm - Weight: 179g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm SPECIFICATIONS: VENTO ARGO R1 150 - Length: 265mm - Width: 150mm - Weight: 186g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm

VENTO ARGO R3 is a performance racing saddle with a short-nose design that improves stability and allows for a more aggressive, aero riding position. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Vento Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the racing option, Vento Argo has been engineered to deliver a riding feel that suits race bikes with aggressive geometry. The padding is made from fizik's proprietary Type 1 foam formulation, which has a lower profile and is reactive and springy for instantaneous response and optimal power transfer. The purposeful shape of its design helps you achieve a better riding posture: the dropped nose supports the pubic ramus when the pelvis rotates forward to add power or to get more aero. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R3: a combination of a ride-compliant carbon-reinforced nylon shell and a Kium hollow rail with a high strength-to-weight ratio - Type 1 foam: low-profile, reactive and springy for efficient power transfer SPECIFICATIONS: VENTO ARGO R3 140 - Length: 265mm - Width: 140mm - Weight: 213g - Height at 75mm width: 45mm - Length from nose to 75mm width: 114mm - Rail: 7 x 7mm SPECIFICATIONS: VENTO ARGO R3 150 - Length: 265mm - Width: 150mm - Weight: 220g - Height at 75mm width: 45mm - Length from nose to 75mm width: 114mm - Rail: 7 x 7mm

The Vento Argo R3 Adaptive is a versatile, short-nosed cycling saddle featuring the revolutionary zonal comfort of 3D-printed cushioning and the high strength-to-weight performance of the Kium hollow rail system. - Adaptive: Carbon Digital Light Synthesis 3D-printing technology, offering seamlessly engineered zonal cushioning - Argo: versatile short-nosed saddle that encourages stability and relieves pressure on soft tissue - R3: a combination of a ride-compliant, carbon-reinforced nylon shell and a Kium hollow rail with high strength-to-weight ratio

VENTO ARGO R5 is a performance racing saddle with a short-nose design that improves stability and allows for a more aggressive, aero riding position. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Vento Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the racing option, Vento Argo has been engineered to deliver a riding feel that suits race bikes with aggressive geometry. The padding is made from fizik's proprietary Type 1 foam formulation, which has a lower profile and is reactive and springy for instantaneous response and optimal power transfer. The purposeful shape of its design helps you achieve a better riding posture: the dropped nose supports the pubic ramus when the pelvis rotates forward to add power or to get more aero. Argo is a product of the Fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Vento: Performance racing series designed in collaboration with professional cyclists - Argo: versatile short nose saddle that encourages stability and reliefs pressure on soft tissue area - R5: a combination of a ride compliant carbon-reinforced nylon shell and an S-Alloy rail - Type 1 foam: low-profile, reactive and springy for efficient power transfer - Vento Argo R5 regular 140mm - road bike saddle SPECIFICATIONS: VENTO ARGO R5 140mm - Length: 265mm - Width: 140mm - Weight: 225g - Height at 75mm width: 45mm - Length from nose to 75mm width: 114mm - Rail: 7 x 7mm - Vento Argo R5 large 150mm - road cycling saddle SPECIFICATIONS: VENTO ARGO R5 150mm - Length: 265mm - Width: 150mm - Weight: 232g - Height at 75mm width: 45mm - Length from nose to 75mm width: 114mm - Rail: 7 x 7mm

- Performance unisex saddle - Short nose allows for a more aggressive, aero-riding position - Pressure relief channel provides all-day comfort - Wide rear width provides additional stability - Tuned to deliver comfort on race day All day performance Push yourself beyond your limits with our latest racing saddle design. Engineered for lightning speed – and comfort – the short design lets you hold an aggressive riding position for longer – letting you fix your seating position and focus on the ride ahead. - Rails: Titanium (7mm) - Base: Flexible Nylon - Cover: Waterproof microfibre - Profile: Flat - Weight: 234g - Width: 155mm - Length: 240mm - Mid rail to saddle topper: 45mm Short for speed The latest evolution of our award-winning Line Saddle, we’ve combined our technological know-how and experience along with thousands of riding hours on the roads to create a saddle with performance-first ergonomics. The innovative design is tuned for race-day comfort – it features a shorter nose, broader rear section, and large cut-out. All these qualities allow you to maintain your preferred aggressive riding position for the whole ride, whatever the gradient. Increase your endurance Go further and faster for longer with the Line-S saddle. Based around our popular Line saddle design, it has a single, split-piece microfibre pad with a full-length central relief channel to decrease pressure on the pudendal artery. The Line S is specifically designed for unrivaled comfort on an all-out performance saddle. Our state-of-the-art Line-S saddle design builds in comfort to every ride. Our unique three-part construction strips away the compression and tension found in traditional hard, stretched-cover saddles. We do this by bonding a waterproof microfibre upper straight onto a flexible base, allowing us to use a softer foam, giving you added comfort, whether you’re heading to the podium or your new PB. Flat is for flat out/ Our Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement.

Do you live an active lifestyle? Is the bike one of your main fitness tools? Then the ergonomic Ergon SF Men saddle should not be missing from your bike! Our new fitness saddle ensures that your cycling enjoyment is not clouded by saddle problems. A perfect balance of sportiness and comfort, the SF Men distributes pressure evenly, which is an added bonus on longer rides. To avoid the common male discomforts and numbness, the anatomically adapted relief channel in the center of the saddle removes pressure from the sensitive soft tissue areas. In addition, the shape and high-quality padding of the saddle are adapted to the position of the upper body during sporty cycling and provides optimum support of the sit bones. - Aids in achieving your fitness goals - Prevents male discomforts and numbness - Sporty and comfortably padded