Hydration

XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.

Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage

The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back in to shape if damaged - Made by hand in Minnesota

Turns your own bottle cage into a quick Cage so you can mount your bottle anywhere.

Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA

Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

The Deva has proven its worth during the cycling classics over cobblestones. Its material and unique cylindrical shape ensure perfect clamping and prevent the bottle slowly working its way up. The cage is designed so that the bottle can be inserted easily and smoothly. And since it's produced in so many different colors, there is one available for everyone's bike.

- 100% Hand-Painted Aluminum - LockTight Wings - Laser Etched Design - Road|MTB Approved

An absolute masterpiece, this cage screams style. The Fly Cage’s clean lines and clean laser logo really stand out. No cage outperforms the Fly Cage Poly—its LockTight Wings design grip your bottle securely while still keeping it easily accessible. - 100% Polycarbonate - LockTight Wings design - Laser-etched logo - Road and MTB approved - High-end and durable

An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable

Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.

Sunlite's Handlebar Mount Bottle Cage lets you attach a water bottle to your handlebars for easy access. Its lightweight design is good for road and mountain use.

Each SICURO Ti cage is hand-made in the USA at our Indianapolis, IN headquarters using custom manufacturing processes and a state-of-the-art laser welder, the first of its kind in the bicycle industry. Made from aerospace-grade titanium tubing, these cages feature unique slotted mounting eyelets that allow fore/aft adjustability on the bike. The second-generation Ti Bottle Cage has a base-plate change to add more flexibility to the positioning on the frame, allowing usage for smaller frames. In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing is as complex and high-tech as it gets. - Seamless 3-2.5 titanium tubing - Extended adjustment mounting: up to 21mm fore/aft - Weight: 30 grams - SILCA Shield Warranty included covering your cage for 25 years! - Please note: bolts are not included

In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction.  This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring.  While classic in appearance, this material, and its manufacturing is as complex and high tech as it gets.  Cerakote is the world's leading high performance ceramic coating for use in aerospace, military, and biomedical applications.  At only 1 micron thick, Cerakote high performance ceramic coating increases abrasion resistance by more than 100 times while increasing corrosion resistance more than 1000 times over traditional metal finishes and paint coatings.  Cerakote even improves fatigue resistance by eliminating the possibility of surface scratching or notching which can lead to stress cracking over time.  

- Pair of Velcro attached bosses - Mount a water bottle cage or pump mount on any part of your frame

Using the same technology of the SlideCage but for front bottle insertion and featuring a bottle size adjustment nose the Topcage delivers great performance and fits to all plastic drinking bottles.

The Universal Aerodrink Bracket fastens quickly and easily to your aerobar extensions using secure Velcro straps. It's compatible with Profile Design's Aerodrink, Insulated Aerodrink, and Aquacell systems (all sold separately).

Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.

Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.

With clean lines and rugged construction, Planet Bike's Aluminum water bottle cages offer lightweight durability. Pick a color that’s right for you and stay hydrated when you're out on the road!

Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.

The Lucky Cat Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Maneki-neko (Japanese for "beckoning cat"), this Portland Design Works bottle cage will undoubtedly bring good luck to its owner. Its side loading design makes it a great fit on small bike frames.

The Portland Design Works Owl Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Great Horned Owl, its wings fold in to securely cradle your water bottle. Get an Owl and make your ride fly. - Constructed of 5052 alloy - Weight: 67 g (2.3 oz) - Includes two stainless bolts for installation - Lifetime PDWarranty

The Portland Design Works Sparrow Cage is made from a single sheet of lightweight 5052 alloy. The Sparrow's wings fold in to securely cradle your water bottle and the cut outs help keep the cage light. Get a Sparrow and make your ride fly. - Constructed of 5052 alloy - Includes two stainless bolts for installation  - Weight: 57g (2oz) - Lifetime PDWarranty

The shape of the white VGD Cage was inspired by the legendary brandy toting St. Bernard rescue dogs of the Swiss Alps. The black VGD was designed to represent another type of rescue dog: the everyday Black Lab mix who's waiting to steal your heart and be adopted at the local shelter. - PDW donates 10% of profits from the Very Good Dog (VGD) Cage to animal advocacy organizations that help very good dogs in need.

Origin-8's Flask Cage is the cage you need to carry your Origin-8 Flask (sold separately). It's made of durable and light aluminum to hold your Flask securely and keep it right at hand.

Origin-8 has all your hydration needs covered with their beautiful stainless-steel Flask. It features a secure screw top, holds 6 ounces of your favorite post-ride recovery drink and weighs only 92 grams empty. You'll want the Flask Cage, too, that lets you carry the Flask for easy access on your bicycle (Cage sold separately).

The Minoura SBH-300 Saddle Water Bottle Cage Mount for 2 Cages attaches behind your saddle to hold two extra water bottle cages or one extra bottle cage and one spare tube set. It is lightweight at only 135 grams, and is in a good position for aerodynamics. All bottle cage screws are included. Not compatible with I-Beam type saddles, standard dual rail type only. - Behind-saddle mounted holder for two extra water bottle cages, or one bottle and one spare tube set - Good position for aerodynamics - Lightweight at 135 grams - Bottle cage mounting screws included - Not compatible with I-Beam type saddle. Standard dual rail type only

- Constructed using a 6mm aluminum rod - Embossed MSW logo

The Kids Water Bottle and Cage Kit features kid-friendly designs on the bottle, paired with a cage that mounts to standard 22.2mm handlebars. Perfect for keeping quick and easy hydration within reach of tiny hands. - 14-oz. Bottle made in the USA - Recyclable, BPA-free bottle made from recycled plastics - Mount cage to handlebars with included two-bolt clamp and steel mounting bolts - Alloy cage is black in color, clamp fits standard 22.2mm handlebar diameter

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

Lezyne's Flow Cage is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. Its X-Grip design holds bottles securely over the rough stuff and allows for easy in/out.

Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! It is available in both left-side and right-side loading configurations.

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

- Ergonomic easy loading cage. - Re-enforced composite matrix construction. - 36g.

Beautifully crafted cycling bottle cage made from an extremely durable Composite Matrix material. It’s engineered and tested to securely hold bicycle water bottles while still offering left and right side-loading action. Weighing only 36 grams, its one-piece design is very lightweight and minimalistic. Compatible with all bicycle frames with standard bottle cage mounts, it performs flawlessly across all forms of riding—from gravel grinding to mountain biking to road racing. - Ergonomic, easy-loading design - Stylish, modern look - 36g lightweight composite matrix

Lezyne's Alloy Cage is CNC-machined out of aluminum for impressive strength and durability. Its unique rib design holds bottles securely over rough roads and allows for easy in/out, plus the integrated pump mounts holds a Road Drive pump securely.

Durable, fiber-reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! The pair comes with one left- and one right-side loading cage.

- Ergonomic easy loading cage. - Re-enforced composite matrix construction. - 36g.

Sleek water bottle shaped organizer that fits into standard bottle cages. Internal compartments, including one zippered, organize small cycling essentials—including tire repair, snacks, personal items and more. It features a soft, semi-rigid shell that’s durable and water resistant. A full zipper allows for a full 180° opening, providing easy access and better organization. Its all black design, with black logos, matches with all styles of bicycles.

Designed with a built-in, discreet holder for an Apple AirTag*, the Matrix Air Cage is a revamped take on our popular Matrix Team Cage. Featuring the same minimalist, dual-side-loading design, it goes one step further by cleanly hiding the AirTag between the bottle cage and bike frame for an added level of security. It's also constructed from the same lightweight, incredibly durable Composite Matrix material and goes one step further with its IPX7 waterproof rating keeping the AirTag dry. By developing it to be virtually indistinguishable from a standard water bottle cage, the Matrix Air Cage is a perfect solution to hide an AirTag and utilize Apple's "FindMy" app to help locate a stolen or missing bicycle. And it's been verified to work with Apple's ultra-wideband signal. Lastly, it comes with a set of stainless steel TR25 security bolts, complete with an included tool bit. -Includes TR25 security bolts and tool. -Ultra-wideband tested. *Apple AirTag not included. *AirTag is a trademark of Apple Inc., registered in the U.S. and other countries and regions.

- Nylon bottle cage - Includes frame mount cage

Elevate your adventure with the TWIST 450 Bottle + Bike Base. This sleek design uses strong magnetic force and mechanical latching to cagelessly secure bottle to bike. Our patented technology magnetically snaps your bottle in place and only releases when you give it a TWIST. Never lose a bottle on the trail again! As our smallest bottle, the 450 is perfect for small frames or for those who like to ride light. Always BPA-Free & BPS-Free. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. - 450 ml / 15.22 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes removable connector - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

Custom Race Plus is an evolution of the most popular bottle cage in the world. It is permeated by a distinct and unmistakable racing feel. Tested and developed "on the road" with the most important Pro Teams worldwide Custom Race Plus satisfies the expectations of all cyclists, at any level. - Top-class hold on the bottle - Self-adjusting retention system - Used by the best teams in the world - Weight: 40g - Diameter: 74mm - Material: FRP

- Self-adjusting elastomer to improve bottle retention - Made with high-impact composite material

Innovative design with side and bottle insertion/removal - Carbon injection bottle cage - Extremely light, 25 grams - Compatible with all frames, ideal for sloping tubes or small sizes

- Rigid alloy construction - Weighs only 65.2 grams

Stay Hydrated on the Long Ride Expanding beverage holder accommodates almost any size coffee cup, bottle or tumbler for easy on-ride access. - Secure: Stretch grip holds your beverage on bumpy rides - Flexible Design: Fits any size beverage - Construction: Precision molded from thermoplastic and stainless hardware - Easy Installation: Thumb screw and rubber shims fit easily on any size handlebar

If you're looking to make the move from your trusty backpack, and join the lumbar pack movement, Hot Laps 5L is a great way to do that. It comes with a squat 2L, lumbar-shaped hydration reservoir, and still has plenty of space to stow all the gear you're used to having on hand for your rides. The cargo pocket features organization for a phone, tools, food, and a light shell. Lower straps untuck to hold any bulky knee pads while side compression straps keep the load close as you empty your water, and the breathable AirFlow back panel does away with the hotspots and "pack sweat" you're used to pedaling through. - 2L / 70oz Dakine x Hydrapak 3D lumbar reservoir - Phaser bite valve - Magnetic buckle auto-locates hydration hose - Breathable Air Flow back panel - Internal organizer pockets - External attachment straps - Padded waistbelt w/zippered phone pocket - Side compression - Safety light attachment

Made with a Purist liner that shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. BPA-Free plastic is made from 100% FDA food- grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

Made with a Purist liner that shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. BPA-Free plastic is made from 100% FDA food- grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

Made with a Purist liner that shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. BPA-Free plastic is made from 100% FDA food- grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

Hydration with a lighter footprint. This isn’t your average water bottle. Made from 70% wheat and 30% LDPE, our plant-based Conte’s bottle does everything a standard bottle does—holds your water, fits in most bottle cages, and keeps you hydrated on the go—but with a more sustainable twist. Whether you're out for a neighborhood spin, commuting to work, or exploring new trails, this bottle is a simple way to ride a little greener. Plus, it's BPA-free, because that's just how it should be. - Made from plants – 70% wheat, 30% LDPE - 600ml size fits most standard bottle cages - Sustainable, lightweight, and BPA-free Good for your ride. Better for the planet.

The all-new Purist Insulated features our Chromatek™ liner—a proprietary insulating barrier that lines the core to keep your liquids cold. Not only do your liquids stay cold, but new squeezable materials allow for unmatched flexibility, too. Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. Chromatek™ liner keeps your liquids cold. Updated materials make for unmatched squeezability. Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design—even when the valve is open. BPA-Free plastic is made from 100% FDA food- grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

Caged up. Molded from a strong nylon composite, the Speed-C cage strikes the balance between weight and features. Where it thrives: On the bike, out in the elements What it's built for: Durability, Convenience Highlights: - Ultralight - Easy in & out - Smooth and secure

CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.

A new design and improved cleanability maintains the Podium bottle's position as the best-of-the-best within the cycling industry. This premium bike bottle prioritizes performance and excellent cage fit above all else for both professional and recreational users. Easy to squeeze and always BPA free, the Podium is the ultimate bottle for rapid and reliable hydration. - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

A new design and improved cleanability maintains the Podium bottle's position as the best-of-the-best within the cycling industry. This premium bike bottle prioritizes performance and excellent cage fit above all else for both professional and recreational users. Easy to squeeze and always BPA free, the Podium is the ultimate bottle for rapid and reliable hydration. - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.